WE ARE PROUD TO ANNOUNCE ANOTHER JACK DANE AUTO SERVICE LOCATION TO SERVE YOU IN ROCKLIN, CA!

Category Archives: Brakes

Slipping into Fall (Driving with ABS Brakes)

As the weather changes over from hot to colder, drivers will have to deal with more slippery streets.  And it's important to know how to drive with the brakes you have on your vehicle.  In the 1970s, anti-lock braking systems (ABS) started to be installed on vehicles and they've been a game changer for drivers.  Most modern vehicles have ABS and it's important to know how to drive with them. In older vehicles without ABS, the driver applies the brakes by pushing down the pedal.  That, in turn, sends braking pressure to all four wheels at once.  But all four tires don't have the same traction because the road surface they're each on isn't exactly the same. ABS allows sensors to determine when particular wheels are slowing down more quickly.  The ABS then reduces braking pressure to the wheels that are about to lock up.  That way the wheel turns and the tires keep some grip. (You have to have grip to stop.) It's kind of what drivers try to achieve when ... read more

Categories:

Brakes

A Sticky Brake Situation (Parking Brake Service and Maintenance)

We've all been there.  You park your vehicle on a steeper than usual hill and worry about it rolling down while you're running your errands.  So you decide you'll use the parking brake.  When you get back, you release the parking brake, hit the ignition, put it in gear and—uh, oh—you can feel the parking brake is still on.  It's stuck.  What do you do now? Welcome to the world of infrequently-used parking brakes.  Yes, they do stick for several reasons. It's common for components to corrode and get locked up.  Sometimes if you have applied it extra hard, it can jam.  Could be a rusty cable, could be a spring that doesn't return the brake to its disengaged position.  Some pieces just break when they're stressed for the first time in a while. A caliper or the pivot arm it's on can also stick. There are a few things you can try to unstick it.  Carefully rock your vehicle by putting it first in drive and then reverse.  You ... read more

Categories:

Brakes

Time for a Brake (Brake Pad Replacement)

Stop! It's one of those things your vehicle has to do consistently and reliably.  That's why brake maintenance is vitally important, worthwhile for you to make sure stays up to date. A brake system has many components. If your vehicle has disc brakes, they have pads that make contact with the rotors (the metal discs).  Those pads usually have a metal back, and the part that presses against the discs is made of a material which provides friction to stop the vehicle. Because of that friction, the pads are expected to wear down and eventually the rotors will, too.  But the pads usually are the part that will need to be replaced more often. But how do you know when it's time? There are several signs, one of which is when your brakes squeak or make a high-pitched sound when you step on the brake pedal.  Many newer vehicles also have sensors on the brake pads.  When the pads get worn down to a certain point, the sensor will tell the vehicle's computer to turn on a li ... read more

Categories:

Brakes

The Need for Speed (Wheel Speed Sensor Maintenance)

Today's vehicles have some pretty amazing technology in them, including a computerized braking system we all pretty much take for granted these days.  Antilock brake systems (ABS) have been around for years but they help drivers stop in much shorter distances reliably than ever before.  When you see your ABS warning light come on, it's important to find out what's causing the problem. It's a safety issue. Often the problem when the ABS light comes on is a faulty wheel speed sensor.  (In some cases the traction control light will also come on, perhaps because of a non-working wheel speed sensor.) Your vehicle uses the speed sensors to measure the rotational speed at each wheel. That sensor sends the speed data to a computer that can then adjust braking power and prevent your wheels from locking up.  If any of the wheel speed sensors isn't working right, the ABS warning light will go on and the vehicle's computer will turn off the antilock brake system.  You'll s ... read more

Categories:

Brakes

For Brakes' Sake (Brake Rotor Service in Sacramento)

Think of how much abuse your brakes take. Day in and day out, they stop your vehicle when it's going fast and when it's going slow. Maybe your vehicle has been vibrating when you brake, or maybe it seems like your stopping distance is a little bit longer than it used to be. Then it's time to get your brakes checked out. After all, you have to be able to stop if you want to be safe. Nearly all newer vehicles have disc brakes on the front, and many have that type of brake on all four wheels. That makes it likely you'll be getting disc brakes fixed at some time in your vehicle's lifetime. Knowing how disc brakes work is as easy as riding a bicycle. If your bike had hand brakes, you'll probably remember a mechanism that squeezed a couple of pads on each side of your bicycle wheel when you applied the brakes. Disc brakes are similar; but instead of the bike wheel, there's a metal disc instead. If that disc is warped or has irregularities in it, it's going to vibrate. It used to be that roto ... read more

Categories:

Brakes

Give me a Brake (Light)!

If that little brake warning light pops up on your dash, do you know what it means? Well, if you said no, you wouldn't be alone. You know it has something to do with your brakes, but exactly what? You're not sure. One of the reasons is that it could mean a lot of different things. It could be something simple, like you put your parking brake on and forgot to take it off. Easy fix, you're on the road in seconds. Or, it could mean there's something wrong with your anti-lock brake system. That is a pretty complex symphony of speed sensors, computers and wiring, and sometimes things get a little out of whack. You could have a defective sensor or some wiring may have gotten damaged or come loose. A trained technician at Made In America Made In Japan with special equipment can sort it all out. It's also possible you have low brake fluid. That could be caused by a number of things. One simple reason is that your brake pads have worn down. Replacing them could solve the problem. Another possib ... read more

Categories:

Brakes

Made In America Made In Japan Brake Service for Safe Stopping in Sacramento

Let's talk about something critical for all Sacramento drivers: your brakes. Your vehicle is heavy, and it takes a lot of muscle to bring it and your passengers to a safe stop – so everything needs to be in good working order. Here's an explanation on how your disc brakes work: The wheel hub keeps your wheel attached to your vehicle. The brake disc – or rotor – is attached to the hub and rotates with the wheel as you drive around Sacramento. Your brake pads clamp onto the rotor to slow the wheel.The brake caliper straddles the rotor and squeezes the rotor to slow it down. The calipers contain brake pads which press on the rotor when you put your foot on the brake. The brake piston causes the calipers to squeeze and release as you use your vehicle brakes.Your brake pads start to wear the first time you step on the brakes. Eventuall ... read more

Categories:

Brakes

Automotive Tips from Made In America Made In Japan: Rotor Problems

The brake rotor, or disc, is attached to your wheel. The brake pads rub on the rotor to slow your car when you are driving in Sacramento.Rotors can warp, crack or become misaligned. They can also be damaged by worn out brake pads that scratch grooves into the surface. These conditions result in less contact surface for the brake pads, leaving you with reduced braking power.Over time and miles, rotors can also wear down below safe specifications. It is important for Sacramento drivers to know that simply replacing brake pads on a wheel with a bad rotor will not solve the problem. Depending on their condition, rotors may be resurfaced or replaced.Brake noise or a pulsation in the brake pedal are signs of potential brake problems that should be addressed right away. If you have any brake concerns, please have your friendly and professional Made In America Made In Japan tech perform a thorough inspection.Give us a call.Made In America Made In Japan1200 I StSacramento, California ... read more

Categories:

Brakes

Automotive Tips from Made In America Made In Japan: Brake Noise

Your brake pads are the important parts that rub against the rotor (or disc) to slow and stop your car when driving in Sacramento. They eventually wear down.When your pads are worn too much, they won’t stop your vehicle as well. When the friction material is worn away, metal parts of the pad are exposed and you’ll hear a squeal or grinding sound. That’s when Sacramento drivers should replace their brake pads at Made In America Made In Japan. Not only will new pads restore your stopping power, but replacing them on time will prevent damage to the rotor.If your brakes are making noise, ask your Made In America Made In Japan service advisor to inspect your brakes. Addressing problems early will restore your safety and prevent expensive brake damage.Made In America Made In Japan1200 I StSacramento, California 9581491

Categories:

Brakes

Hitting the Brakes in Sacramento

Safety should always be an element of your vehicle care. So even if you don't care about how your vehicle looks, you should practice preventive maintenance to protect yourself — and other Sacramento drivers — on the road. And good safety starts with good brakes.Brakes need a regular inspection. There are  parts that wear out or wear down, and it's best to replace them before you have serious problems. Of course, if you are having trouble with your brakes, NOW is the time to fix them. If your brake warning light is on, that's a good sign that you need your brakes checked. You can also tell something is wrong with your brakes by the feel of the pedal or unusual sounds while braking. If the brake pedal is low, feels spongy when you press it or is hard to push, that indicates a problem with your brakes. If you hear squealing, grinding or clunking noises when you brake, that can also indicate serious problems. If vibrations accompa ... read more

Categories:

Brakes
12
Having Trouble Finding us?
Get Directions
Jack Dane Auto Service is committed to ensuring effective communication and digital accessibility to all users. We are continually improving the user experience for everyone, and apply the relevant accessibility standards to achieve these goals. We welcome your feedback. Please call Sacramento (Downtown) (916) 442-7139, Rocklin (Formerly The Car Docs) (916) 934-5200 if you have any issues in accessing any area of our website.