Category Archives: What Customers Should Know

Cruisin' on Down Main Street

When automakers first came out with cruise control, it was a real luxury item.  The older cruise controls used a mechanical vacuum system but it worked.  Well, some of the time.  Now days, cruise control is all electronic, thanks to computers.  It's reliable and a real convenience on long trips.  Cruise control is offered on most vehicles and standard on a lot of them.  Because it's electronic, when it breaks, it's usually some electronic component.  Your vehicle's cruise can be the victim of a blown fuse. Or your vehicle's speed sensor, which—not surprisingly—measures your vehicle's speed, can also stop working.  And that will cause your cruise to stop cruising.  Vehicles with cruise control also have a built-in feature that, when the brakes are applied, turns off the cruise.  With electronic cruise control, that happens thanks to the brake pedal switch, and if a problem develops in that switch, the cruise might not work. T ... read more

When "Oh, no!" Turns Into, "All right!"

Things we don't expect happen to our vehicles. And let's face, no one really wants to spend money on an unexpected repair. But if you are putting off going to your vehicle repair facility because you're dreading bad news, you might just be putting off some good news. There was one minivan driver who'd had the same van for years and never had a problem with the power sliding doors.  Then one day, the electrical switches in the door pillars stopped working.  The key fob would still open them, but the door switches wouldn't do a thing. Of course, the van driver feared the worst: an electrical problem, a major computer failure, mice chewing up the wires.  So, he put off going into the repair facility for a couple of months.  One day, it was time for his regular oil change and the service advisor asked him if there was anything else going on with the van.  The owner mentioned the door problem but said he didn't want to spend a fortune on it. He waited for his van, a ... read more

Tacky or Techie? The Tachometer.

There's a gauge that many vehicles have that says RPM on it.  And there are a lot of people who either don't pay any attention to it or don't even know what it is. Here's why it's a good gauge to know about. It's called a tachometer, and that "RPM" label means it is measuring how many revolutions per minute (RPM) the engine is turning.  Automotive experts know that a vehicle's engine can be damaged if it turns too fast (revving too high) or too slowly ("lugging" the engine). A tachometer (sometimes called a tach) is almost a "must-have" gauge for vehicles with a manual transmission; the driver has to manually change gears; the tach helps the driver know when revolutions are in the optimal range. Some say you don't need a tachometer if you drive a vehicle with an automatic transmission. It's true that most drivers of automatics don't even look at it.  But there are times when paying attention to the tach can help you prevent an expensive repair. Here's a good example.&nbs ... read more

Having Trouble Finding us?
Get Directions
If You Are Using A Screen Reader And Are Having Problems Using This Website, please call Jack Dane Auto Service (916) 442-7139 For Assistance.